余热利用低低韫电除坐技术在燃煤电厂的应用

论述并总结了余热利用低低温电除尘技术在新昌某电厂700MW机组燃煤锅炉上的应用情况,指出采用该技术是燃煤电厂进一步减排节能的有益尝试。     

静电除尘器的粉尘非稳态收集过程

为了全面揭示电除尘器粉尘非稳态收集过程,建立完整的非稳态静电收尘理论,根据静电学基本原理,研究了极板粉尘层电荷导人、积累、释放的过程,推导出随粉尘层厚度增长而改变的动态收尘电场强度计算公式,进而得到荷电粒子动态驱进速度公式,最终形成静电除尘非稳态收集理论.研究结果表明,在静电收尘过程中,粒子驱进速度与粉尘比电阻、工作电压、粉尘层厚度等多种因素有关;随粉尘比电阻的升高,收尘效率下降,当供电电压为最佳工作电压时收尘效率最高.针对不同比电阻粉尘进行了多项实验研究,实验结果与理论研究结果吻合.非稳态静电收尘理论成功地解释了实际静电收尘过程中与传统静电收尘理论相矛盾的地方,为静电除尘器的设计及其运行参数的选取提供了更为科学的理论基础.     

电捕焦油器安全运行条件

为避免焦化企业化产回收工艺中焦炉煤气含焦油雾较高,可能影响后序工艺产品质量或操作,同时,造成安全隐患,目前,国内大型焦化企业普遍采用电捕焦油器,以有效清除焦油雾。但电捕焦油器在运行过程中,若控制不当极易发生火灾爆炸事故。通过介绍电捕焦油器的工作原理,分析电捕焦油器运行过程中所涉及的危险物质及运行中可能发生的火灾爆炸危险,结合火灾爆炸三要素及生产过程中遇到的实际问题,依据《焦化安全规程》（GB12710）,从激发能源、煤气中含氧量的控制入手,阐述电捕焦油器安全运行条件。     

生物气溶胶采样技术研究进展

介绍了沉降法、撞击法和静电场吸附法等3种常见生物气溶胶采样技术的基本原理及各自的优缺点,指出其发展趋势为建立复合式、大流量联合采样技术及小活性粒子的采样技术,实现生物气溶胶的快速自动化采样.     

Flow analysis of major and trace elements in residues from large-scale sewage sludge incineration

Increase of sewage sludge (SS) has led to the construction of more incineration plants, exacerbating to the production of SS incineration residues. However, few studies have considered the mass balance of elements in large-scale SS incineration plants, affecting the residues treatment and utilization. In this study, flow analysis was conducted for major and trace elements in the SS, the fly ash (sewage sludge ash, SSA) and bottom ash from two large-scale SS incineration plants. The elemental characteristics were compared with those of coal fly ash (CFA), and air pollution control residues from municipal solid waste incineration (MSWIA), as well as related criteria. The results showed that the most abundant major element in SSA was Si, ranging from 120 to 240 g/kg, followed by Al (76–348 g/kg), Ca (26–113 g/kg), Fe (35–80 g/kg), and P (26–104 g/kg), and the trace elements were mainly Zn, Ba, Cu, and Mn. Not all the major elements were derived from SS. Most trace elements in the SS incineration residues accounted for 82.4%–127% of those from SS, indicating that SS was the main source of trace elements. The partitioning of heavy metals in the SS incineration residues showed that electrostatic precipitator ash or cyclone ash with high production rates were the major pollutant sinks. The differences in some major and trace elements could be indicators to differentiate SSA from CFA and MSWIA. Compared with related land criteria, the pollutants in SSA should not be ignored during disposal and utilization.     

超低排放燃煤电厂中湿式电除尘器对可凝结颗粒物排放特性的影响

为了解不同负荷下超低排放燃煤电厂中湿式电除尘器（WESP）对可凝结颗粒物（CPM）排放特性的影响,基于US EPA Method 202搭建了CPM采样装置,分析了某安装有WESP的超低排放燃煤电厂烟气中CPM的排放水平,评估了机组负荷对CPM排放浓度的影响以及WESP对CPM中各组分的脱除效率．结果表明,在75%负荷和100%负荷条件下,超低排放电厂CPM的排放量分别为27.27 mg·m^-3和28.71 mg·m^-3,WESP对CPM的脱除效率分别为35.59%和27.59%.SO₄^2-是CPM中水溶性离子的主要成分,在不同负荷条件下SO₄^2-在CPM中无机组分的质量分数达到了65%以上;WESP对于CPM中Cl^-、K⁺、Ca²⁺、Mg²⁺和Na⁺等无机离子的脱除效率可以达到30%～50%,但会使CPM中SO₄^2...     

Characteristics of the vibrating-mesh minimum ignition energy testing apparatus for dust clouds

A novel apparatus for testing the minimum ignition energies of flammable dusts is introduced. Unlike the conventional apparatus (the Hartmann tube), this new apparatus employs a vibrating mesh to produce a dust cloud. Using three kinds of powders, namely lycopodium, anthraquinone and polyacrylonitrile, which are designated as the samples for calibration by the International Electrotechnical Commission (IEC, 1994) standards, fundamental characteristics were experimentally investigated. Concerning the minimum ignition energies (MIEs), the new testing apparatus worked well for two samples, lycopodium and polyacrylonitrile. The MIE for anthraquinone, however, was by far larger than the expected value. We concluded that the aggregation of anthraquinone particles is the main cause of the difference and is attributable to both the tribo-charges acquired by the particles when passing through the mesh and the filamentary shape of the crystal. Other essential factors for characterizing the testing apparatus, such as the concentration of dust, the shape and spacing of the sparking electrode system, and the impedance of the sparking circuit are discussed.     

双极不对称预荷电静电增强过滤除尘技术的应用

双极不对称预荷电静电增强过滤除尘技术 ,是国家“九五”科技攻关课题所取得的成果之一 ,该技术采用双极不对称荷电增强方式 ,将普通静电增强效果与粉尘凝并机能有机地结合在一起 ,既提高了过滤除尘器的收尘效率 ,尤其是呼吸性粉尘的效率 ,同时又极大地改善了滤料粉尘层的结构 ,可显著地降低过滤阻力增值 ,节约运行能耗。笔者研究的该技术应用于焊接车间的焊接烟尘的治理上 ,取得了良好的效果。现场测试表明 ,该技术对焊接烟尘的滤除效率提高了 3% ,尤其对微细粉尘效果显著 ,2 μm粉尘穿透率相对下降了 4 7%。采用超细滑石粉高粉尘负荷测试结果表明 ,过滤阻力增值降低达 30 % ,清灰效果明显改善     

脉冲布袋除尘器净化分银炉含酸碱烟气的控制

介绍了用于净化铅锌冶炼厂分银炉含酸碱烟气的脉冲布袋除尘器的控制。从烟气温度控制、脉冲布袋除尘器清灰控制两个方面作了说明。     

利用计算流体动力学(CFD)方法研究电收尘器斜向气流分布

在讨论了电收尘器电场内气流分布对除尘效率影响的基础上,介绍有效降低粉尘返流损失,提高电收尘效率的斜向气流技术,进而利用CFD方法对电场内的气流分布进行数值模拟,给出了在电场内实现斜向气流分布时气流分布板结构调整方法和参数。